ZIMO     DCCTRAIN is proud to offer ZIMO DCC products, widely recognized as being among the finest in the world. ZIMO offers starter sets in both standard and economy configurations, and for scales from N to G. Each set includes a command station, a hand-held controller (also known as a “cab”) that can be used for walk-around operation, decoders sized to the scale of your operation, connectors and connecting cable, and operating manual.  ZIMO decoders are fully NMRA DCC compatible. ZIMO decoders offer noiseless operation, speed stabilization on grades through “Back-EMF”, 128 speed steps, 5-digit addressing, Silent drive, support for all lighting effects with programmable operation, and much more.

Front:
- Rotary knob, ON/OFF switch, voltage adjustement, emergency stop, display, address selection, driving...
- Display: voltage/current, DCC, RailCom, Bus, USB/LAN monitor, AOS display, driving & switching...
- Buttons for software update & sound project loading, driving and switch control...
- USB host for decoder update and sound loading via USB stick as well as updating this device...
- CAN socket for ZIMO cabs (throttles) and other devices, in parallel with CAN socket on the bac
Rear:
- Large screw terminal for power supply (not transformer) from 90W to 500W (24V to 30V)
- Middle size screw terminal for “Line 1” (main output, up to 12A)
- Small screw terminal for “Line 2” (programming & update track or branch line (up to 8A)
- Triple screw terminal for DC power (same voltage as on track) and ground
- 16 input or output pins for external “panic stop”, AOS and other functions
- Socket for other devices: Roco Lokmaus, Fred (Loconet), S88 bus, or external booster
- CAN socket for ZIMO devices with sync cable, boosters, track section modules...
- Etherent LAN socket (e.g. wireless router), USB client socket (PC),  ZigBee radio antenna