This digital command station was
developed for model railroaders who operate a small or a midsize layout and who do not want to
abandon contemporary control techniques. Thanks to its bi-directional infrared technique, the
Navigator allows wireless control of your locos!
controls up to 40 locomotives; locos speaking DCC or Motorola® connected though Locosniffer with ECOS ONLY!!! are
appropriate. Depending on the decoders´ abilities, the Navigator switches up to 21 functions
per locomotive and is able to handle up to 9999 addresses (up to 255 addresses are possible during
Motorola® operation). Of course every loco can be named and assigned individually with an
You can also
drive multiple consists with the Navigator; up to 6 locomotives can be moved at the same time.
During consist operation access to the functions of each loco is granted - at any time; e.g. you
are able to activate the horn of the leading loco.
As is expected
of a modern digital command station, the Navigator also switches your DCC accessories and
The Navigator It doesn´t matter whether you still use the
original Märklin® k83 or k84, or the SwitchPilot which is compatible to it; you may construct
up to 100 magnetic accessories on your layout and switch them. The Navigator connected though
Locosniffer with ECOS ONLY!!! handl
cannot avoid changing the settings of your decoders during digital analog operation. The Navigator
supports you with the programming of the decoders via its clearly structured operation interface.
All CVs of DCC decoders can be read and changed on the programming track.
Power supply 110-240 V with US
There is NO USB