Evolution
Express Set Includes:
- DCS210+ Command
Station/Booster With Intelligent AutoReverse
- DT602 Super LocoNet
Throttle
- UP5 Universal
Panel
- PS615 Power
Supply
- Evolution Express
Manual
The DT602
Advanced Super Throttle & DCS210+ Advanced Command Station
Offers
- Works with compatible
LocoNet systems
- Color 2.4” LCD
Display Screen
- Advanced menu system and
displays
- Built-in scrolling help
and prompting
- Soft ON/OFF switch, with
zero OFF power-drain
- Advanced display Power
Saving for longer wireless battery operation
- No more 9V batteries to
remove! Throttles are now powered in wireless modes by 3 AA cells!
- Can use recharged AA
batteries
- Available in standard
tethered or Radio Duplex
- Duplex Scan for available
Networks and radio signal strength. Run without cords!
- All throttles come with a
LocoNet cord that can be unplugged, and is replaceable
- Dual throttle controls
let you control two locos simultaneously
- Run locomotives with
“encoder click” knobs for both speed and direction control
- Full numeric keypad makes
loco selection simple
- Control light and sound
effects functions with the press of a button
- Control 29 functions (F0-
F28).
- Function active/inactive
indicators
- Convenient step-by-step
throttle option set up
- Supports simplified
decoder programming
- Simplified 2 or 4 digit
addressing setup
- Over 9,000 locomotive
decoder addresses
- Supports turnout and
stationary decoder control
- Over 2000 turnout decoder
addresses
- Fast clock
display
- Recall
feature
- Advanced Route
editor
- USB
Interface
Big System
Capacity for Big Layouts
- Run up to 100 addresses
at the same time on your system.
- Run up to 100 throttles
at the same time on your system.
Over 9000
Locomotive Addresses
- Address 00 for operation
of one loco or MU consist without decoders
- Two Digit Addressing is
easy to use. (Address 01-127)
- Four Digit Addressing
lets you use the road number of your engines as their addresses. (Address 0128-
9000+)
5 or 8 Amps of
Power to Run More Trains
- Selectable Scale Voltage
for Safe Operation in ALL Scales
- Customizable Voltage
Settings
- 5 amps of power with
included PS615 power supply
- 8 amps with PS2012E power
supply (sold separately)
Function
Control
- Control 29 functions (F0-
F28).
- Function 2 is a special
non-latching key that can be used to sound the horn for as long as the key is held
down.
- Constant brightness
lighting. Headlights can be directional or independently controlled (depending on decoder
capabilities).
Two DCC
Outputs are Better than One!
- Use one output for
programming decoders while the other runs the layout. No need to shut down the layout to program
decoders!
- Use one output for a
braking section while the other runs the layout.
Decoder
Programming
- Built in read/write
programmer lets you program and read back CV values.
- Supports Paged
programming (Digitrax preferred method). Also supports direct, register and ops mode
programming
Consisting
- Supports Universal
consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even
analog locos.
- Advanced consisting and
Basic consisting, too!
- Nested consisting where
consists can be consisted together.
Stationary
Decoders, Turnout Control & Turnout Position Reporting
- Access to stationary
decoder control for turnouts and other devices.
- DT602 reports turnout
position based on last command sent.
- Control 2000+ stationary
decoder addresses.
Routes
- Turnout List/Route
capability to simplify complex yard operations.
- EZ routes button for
simplified Command Station route programming
Customizable
System Options
- Turn audible warnings on
or off.
- Set up purging
options.
- Multi-format command
station mode.
- Loco Reset button for
easy system purging
UP5 Universal
Panel
- Makes LocoNet hook
up simple!
- 2 LocoNet jacks for
hooking up your LocoNet network.
- 3 throttle jacks for
hooking up throttles and other non-RailSync devices.
Expandability
- Evolution is just the
beginning for large, complex layouts that emphasize prototypical operations.
- With LocoNet you can add
more boosters, throttles, power management, detection, transponding, signaling and much
more.
- DCS210+ comes with 3
LocoNet ports for easy expandability and a USB interface!
Other Advanced
Features
- IPL updatable firmware
for continued product improvements
- Device Query and Device
Statistics to help with troubleshooting
- Input Mode to help set up
detection on your layout
- Uses Expanded
slots