LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics,
however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This
lack of flexibility comes with a cheaper price.
LokPilot 5 decoders are offered with all common interfaces.
LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-
digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders
register automatically with a suitable DCC system like the ESU CabControl.
decoder accepts all DCC programming modes and thanks to RailCom® the CV values can be read on
the main track with RailCom equipped DCC systems. For command stations that only program the CVs
from 1-255 auxiliary CV registers exist.
LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO®
HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC
voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle
trainenables automatic commuting between two train stations.
LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set
decoder switches between the operating modes fully automatically "on-the-fly".
that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot
5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5
DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the
executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level
outputs added. All-important lighting functions are available. The brightness of each outputcan
be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for
ROCO®, Krois® and Telex® couplings.
engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably
adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with
bell-armature motors.Operation - The typical “hum” is a thing of the past. The load
control now has up to10 CVs which can be adjusted for difficult cases. The unique
"Autotune" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5
DCC decoder delivers up to 1.5A of motor current. Enough juice even for older
request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail
course, all function outputs and the motor output are protected against
you to enjoy your decoder for as long as possible.